Risco LightSYS2 - Page 6

Page 6
2-way Remote Control key fob
Operation Quick
High Security Mode
1
Full Set
> [Code]
Partial Set*
> [Code]
Full Unset
> [Code]
System
Status
for 2 seconds
for 2 seconds > Code
Output Control A/B/C
for 2 seconds
for 2
seconds > [Code]
Panic Alarm simultaneously for 2 seconds
Clear Operation
*For Partial setting with no entry delay, press and hold for two seconds
Notes:
1. Consult your engineer for the operations defined with a code.
2. The proximity tag can be used instead of code.
3. For Partial Setting with no entry delay press
for 2 seconds.
4. Light sensor is used to save battery by turning on/off the keypad backlight.
5. Needs to be defined by your engineer.