RisingHF ST Nucleo LoRa GW - User Manual

ST Nucleo LoRa GW User Guide
RisingHF
Document information
Info
Content
Keywords
RisingHF, ST, Loriot, LoRa, Gateway, Nucleo
Abstract
This document describes how to use ST Nucleo F7 LoRa
Gateway to connect to Loriot server or others similar server
which support packet forwarder mode.
ST Nucleo LoRa GW_US915 User Guide
V2.7

RisingHF ST Nucleo LoRa GW Specifications

General

Category	Control Unit
Model	ST Nucleo LoRa GW
LoRa Frequency	868 MHz / 915 MHz
MCU	STM32L073RZ
LoRa Transceiver	SX1276
Frequency Bands	433/470/868/915 MHz
Connectivity	USB
Power Supply	5V
LoRaWAN Protocol	LoRaWAN
Frequency Band	868 MHz / 915 MHz
Operating Voltage	5V
Interface	USB

Summary

1 Introduction

2 Features

3 System Description

3.1 Nucleo-F746 ZG Board

Details the STM32 Nucleo-F746ZG board specifications and features.

3.2 ST Nucleo LoRa GW Module

Describes the ST Nucleo LoRa GW module, its components, and architecture.

4 System Setup

4.1 Hardware Connection

Guides on connecting the hardware components for the system setup.

4.2 FW Download

Instructions on how to download and install the firmware for the gateway.

4.3 Get Started

Provides initial steps for setting up and operating the LoRaWAN gateway.

4.4 Register Sensor Mote

5 AT Command

5.4 Commands List

5.5 Error Code

5.6 Commands

6 Demo Page

7 Others Information for Reference

7.1 Power Supply and Consumption

7.3 RF Performance Measurement