Storing Original Data and Use Method
Converting Hard-copies to Stored Data [Scan Mode]
188
Converting Hard-copies to Stored Data
[Scan Mode]
Scan mode is a function that allows you to scan a hard-copy original with the machine's scanner to save as storage
data or USB Flash Drive data.
You can repeatedly retrieve and print previously scanned and stored original data. This saves you the trouble of re-
scanning the documents when repeatedly printing the same materials.
)p.186
This function also prevents documents from getting lost or damaged over time.
Important!:
• The storage function is not available in the machine equipped with the optional RISO IS300 controller. The data
scanned in the Scan Mode is stored in IS300.
Note:
• Delete unnecessary stored data when the remaining free space of the optional Document Storage Card or USB
Flash Drive is limited. The free space is displayed in the Storage Selection Screen or USB Job List Screen.
)p.196
The following functions can be used in scan mode: See the explanation of each function for more details.
• Image ()p.58)
• Contrast ()p.60)
• Size (enlargement/reduction) ()p.61)
• Dot Process ()p.67)
• Contrast Adj ()p.68)
• Tone Curve ()p.69)
• 2 Up/Multi-Up Print ()p.71)
• Preview ()p.92)
• Book Shadow ()p.84)
• Layout ()p.80)
• Scanning Side - ADF ()p.158)
• My Direct Access ()p.164)
The following functions are specific to scan mode.
•Format ()p.192)
To Next Page
Loading...
