10
Connections and
Generator’s Features
We remind you to follow what prescribed
by laws UNI CEI and to respect D. Lgs. 09/04/08 n°81
Fusion machine can work with alternating current between minimum value of 195V
(94V for 110V version) and max value of 265V (127V for 110V version). Frequency
may vary between 50Hz and 60Hz.
Use earth connection at all times with differential switch on circuit breaker 16A
(32A for 110V version) with “slow” curve. Power peaks when beginning fusion can
reach 3500VA. Fusion machine can operate with an ambient temperature
between –10 °C and +40°C.
Dimensions of electrofusion couplers used will determine power required by
generator. Power may vary also according to connections, cleanliness and
connection’s conditions, as well as according to generator’s features.
WARNING: during fusion procedure DO NOT connect other tools to generator.
Generator’s power decreases of about 10% every 1000 m of altitude.
Use power cables with section of 2,5 mm
2
(6 mm
2
for 110V version) with a
maximum length of 20 m. Cable has to be completely unwound and extended.
To Next Page
Loading...
