Ritmo ELEKTRA 400 - Operating Instructions Overview

14
Operating Instructions
Press button G to turn
machine on.
Machine performs a self
testing to check correct
functioning.
If testing is ok display will
show what’s on side
picture *.
If testing reveals and error
an error code will be
displayed (see page 22 ÷
25).
* ELEKTRA might be set in a particolar condition which allows the use of the equipment
only through a code bar BADGE. Switching on the machine will display an entry
screen which can be unblocked only scanning the “operator” or “supervisor” code.
For further information see page 26.
Use keys C (½ ¾) to scroll main menu.
FUSION BY BAR
CODE READING
FUSION BY
MANUAL
INTRODUCTION
OF BAR CODE
FUSION BY
MANUAL
INTRODUCTION
OF TENSION AND
FUSION TIME
SETUP AND
UTILITIES
PRINTING AND
USB
CONNECTION
Page 17 Page 18 Page 19 Page 20 Page 21
26°C 218V 50Hz
Test fallito
For meaning of error
messages see pages
22 ÷ 25
Test O
K