Ritmo ELEKTRA 400 - Fusion Traceability

15
FUSION TRACEABILITY
Before fusion procedure it
is necessary to decide
whether you want to use
machine’s bar code
reading system of
pipe/fittings in order to
have complete
traceability of fusion
completed. Fusion data
will be stored in
machine’s memory and
can be printed or
downloaded.
Scroll main menu until
arriving to SETUP AND
UTILITIES. Press ENTER to
access next step.
Select“Traceability”using
keys C (¿À).
Press ENTER
Press keys C (½ ¾) to
activate or deactivate
traceability.
Press ENTER to save
settings and go back to
menu.
OPZIONI
Scelta lingua
 Tracciabilità
Blocco memoria
Informazioni
Altre funzioni
TRACCIABILITÀ
ABILITATA
BAR CODE
Traceability
Pipe/fitting 1
BAR CODE
Traceability
Cou
p
le
r
BAR CODE
Traceability
Pipe/fitting 2
BAR CODE
Parameters Set Up