8
Safety Standards
¾ Carefully read instructions before use.
¾ WARNING! When using electric tools, follow safety standards to avoid fire and
electric hazards.
¾ KEEP WORKPLACE CLEAN. Untidiness on the workplace may be cause of
accidents.
¾ CAREFUL TO AMBIENT CONDITIONS. Do not expose electric tools or fusion
machines to the rain. Do not use electric tools or fusion machines in humid
places. Make sure lighting is appropriate. Do not use electric tools or fusion
machines near liquids or inflammable gases.
¾ PROTECT YOURSELF FROM ELECTRIC HAZARD. Avoid contact with objects
connected to earth. Be careful not to touch electric cables.
¾ KEEP UNAUTHORIZED PEOPLE AWAY FROM WORKPLACE. Electric tools and fusion
machines can be used only by authorized people. Keep unauthorized people
away from workplace.
¾ KEEP ELECTRIC TOOLS AND FUSION MACHINES IN A SAFE PLACE. Electric tools,
fusion machines and tools in general have to be stored in dry and safe places
not reachable by unauthorized people.
¾ DO NOT OVERWORK POWER TOOLS. Keep within limits given by manufacturer for
the best performance, for more time and in safe conditions.
¾ ALWAYS USE SPECIFIC TOOLS AND ACCESSORIES ACCORDING TO THE JOB.
Always use accessories compatible with fusion machine (be careful especially
with power generators, extensions for power cables, fusion cable and
adapters). Let power tools to cool down after using for a long time. The use of
tools or accessories different from the ones recommended by manufacturer
may cause injuries to operator, affect performance of the fusion machine and
other tools and void warranty.
¾ DO NOT USE CABLES OF FUSION MACHINE OR OTHER TOOLS FOR INCORRECT
PURPOSES. Do not use cables to move machine around or to disconnect from
power outlet. Protect cables and fusion machine from warm environments and
from contact with sharp objects.
¾ ALWAYS USE SPECIAL ALIGNERS. Always align pipes and fittings using special
aligner. This helps to perform a correct fusion and a safe job.
To Next Page
Loading...
