Ritmo ELEKTRA 400 - Access Control Modes; Operators Badge Mode (ISO 12176-3); Activate Operators Badge Mode

26
OPERATOR’S BADGE MODE (ISO 12176-3)
ACTIVATE OPERATOR’S BADGE mode
DEACTIVATE OPERATOR’S BADGE mode (*)
(*) If you don’t have the operator’s badge, you won’t have access to the basic
functions of the machine. Contact an authorized service center.
OPTIONS
Language
Traceability
Memory block
Information
 Other functions
Type code 6161 and press ENTER.
Turn off and then turn on the machine.
The machine can now be used with
the operator’s badge, only.
OPERATOR
OPTIONS
Language
Traceability
Memory block
Information
 Other functions
Type code 7272 and press ENTER.
Turn off and then turn on the machine.