EasyManua.ls Logo

RKI Instruments Eagle Series - User Manual

RKI Instruments Eagle Series
86 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
www.rkiinstruments.com
Instruction Manual
Eagle Series
Portable Multi-Gas Detector
Part Number: 71-0028RK
Revision: E
Released: 9/19/11

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the RKI Instruments Eagle Series and is the answer not in the manual?

RKI Instruments Eagle Series Specifications

General IconGeneral
Sampling MethodDiffusion
DisplayLCD
AlarmsAudible and visual
Detection PrincipleElectrochemical
Resolution1 ppm
Operating Temperature-20°C to 50°C
Data LoggingYes
CertificationsATEX, IECEx, UL

Summary

Safety Warnings

General Safety Precautions

Read and understand manual before operating. Improper use can lead to serious injury or death.

Warranty Information

Product Warranty Terms

Details RKI's warranty for gas alarm equipment, covering defects in materials and workmanship for one year.

Introduction to the RKI Eagle

Product Overview

Describes the RKI Eagle as an advanced portable gas detection system with key features and certifications.

About This Manual

Explains the manual's scope, intended use, and organization, covering standard sections and appendices.

Eagle Product Specifications

Eagle Physical Specifications

Lists physical and environmental specifications for the Eagle, including target gases, dimensions, weight, and power.

Standard Sensor Specifications

Details specifications for standard sensors: range, alarm levels, detection principle, response time, and accuracy.

Product Description and Components

Case and Control Panel

Describes the Eagle's case, handle, shielding, control panel, and buttons.

Key Components Overview

Details alarm lights, buzzer, interface port, and sample-drawing system.

Sensor Details

Explains the function and connection of combustible gas, oxygen, and toxic gas sensors.

Circuit Boards and Switches

Explains the analog and main PCBs, and the methane elimination and CAL/SETUP switches.

Eagle Operating Procedures

Starting Up the Eagle

Step-by-step guide to connecting components and powering on the Eagle unit.

Normal Operation and Monitoring

Describes continuous monitoring, backlight, beeps, probe use, and monitoring combustible gas.

User Access and Shutdown

Instructions on controlling functions via CAL/SETUP switch and safely powering down the unit.

Alarm System and Indications

Gas and Over-Range Alarms

Details visual and audible indicators for first/second gas, STEL, TWA, and over-range alarms.

System Alarms

Explains alarms for low flow, low battery, and sensor failure, including emergency operation.

Resetting Gas Alarms

Covers resetting self-resetting and latching alarms with or without alarm silence options.

Display Modes and Information

User and Station ID Screen

Screen for entering user and station identifiers, relevant for data logging.

Key Display Screens

Details peak readings, elapsed time, TWA/STEL, battery voltage, and date/time screens.

Data Logger Display Information

Covers clearing data logger storage and viewing remaining log time.

Setup Mode Configuration Options

Entering and Navigating Setup Mode

Procedure to enter setup mode, navigate menus, and return to normal operation.

Sensor and Alarm Settings

Details updating channel settings, target gas labels, and alarm point settings for various sensors.

System Settings Configuration

Covers serial number, lunch break, alarm latching/silence, and auto calibration settings.

Default Settings and Reset

Options to reset all, alarm points only, or oxygen zero settings to factory defaults.

Calibration Procedures

Calibration Preparation

Lists necessary supplies, equipment, and steps to prepare the Eagle for calibration.

Auto and Single Calibration Methods

Details the Auto Calibration and Single Calibration methods for sensors.

Single Calibration Specifics

Specific steps for calibrating individual sensors, including adjusting controls.

Maintenance and Battery Management

Battery Voltage Check

Procedure to check the battery voltage and the warning levels.

Replacing Batteries and Sensors

Instructions for replacing alkaline/Ni-Cd batteries and various sensors.

Parts and Accessories List

Standard Eagle Parts

Lists part numbers and descriptions for standard Eagle replacement parts and accessories.

Non-Standard Toxic Sensor Parts

Part numbers and descriptions for non-standard toxic gas sensors and related items.

Methane Elimination Feature

Setting Up Methane Elimination Mode

Procedure to set the Eagle for methane elimination mode using internal or external switches.

Operating and Returning from Methane Mode

How to monitor gases in Methane Elimination mode and return to standard mode.

Non-Standard Toxic Gas Sensors

Specifications for Toxic Sensors

Details range, alarms, TWA, and STEL for various non-standard toxic gases.

Sensor Description and Calibration

Describes sensor installation, special hose needs, and calibration procedures.

Carbon Dioxide (CO2) Sensors

CO2 Sensor Specifications

Lists range, alarm settings, TWA, and STEL specifications for carbon dioxide sensors.

CO2 Sensor Operation and Calibration

Covers fresh air readings, demand zero, and calibration procedures for CO2 sensors.

Five-Gas and Six-Gas Models

Model Overview and Channel Display

Describes multi-channel models and how to display additional gas readings.

Alarms and Mode Navigation

How alarms on non-displayed channels are indicated and how to navigate display modes.

Eagle Transformer Gas Tester Model

Model Description and Operation

Details the specific setup for transformer gas testing, including sensor type and dilution fitting.

Transformer Tester Calibration

Guidance on calibrating the tester and a list of specific parts for this model.

Data Logger Board Installation

Procedure for Board Installation

Step-by-step instructions for installing the optional data logger board.

Infrared Hydrocarbon (HC) Sensor

HC Sensor Specifications and Target Gases

Details specifications, target gases, and sensor configuration for HC sensors.

Calibrating the Infrared HC Sensor

Procedure for calibrating the HC sensor, including using specific calibration gases.

Related product manuals