Eagle Instruction Manual Setup Mode • 38
1. From the main menu, select the LOG DATA OVER WRITE menu
option.
2. Press the AIR/▲ or SHIFT/▼ button to display the desired
setting.
3. Press the POWER/ENTER button to enter the setting and return to
the main menu.
Updating the Time Calibration Setting (data log option)
This setting indicates how often the Eagle alerts you to needed
calibration. The minimum setting is 1 day; the maximum setting is 180
days. The default setting is “off”.
Tip: Press and hold the AIR/▲ or SHIFT/▼ button to rapidly scroll
through settings.
1. From the main menu, select the TIME CALIBRATION menu
option.
2. Press the AIR/▲ and SHIFT/▼ buttons to display the desired
setting.
3. Press the POWER/ENTER button to enter the setting and return to
the main menu.
Updating the Date and Time Settings (data log option)
The Data Logger uses the data and time to identify entries.
1. From the main menu, select the DATE/TIME menu option.
2. Press the AIR/▲ or SHIFT/▼ button to display the desired
month.
RL
A
ET
G
G
N
O
O
TE
AD
OVER WRI
L
T
AA
C
I
Y
T
E
S
D
TIME
A
RIOB
REQU STE
N
Sffo
PA
17 1
4
:
R
998
130
To Next Page
Loading...
Need help?
General
