RKI Instruments Eagle Series - Page 47

Eagle Instruction Manual Setup Mode • 40
To reset all default settings:
1. From the main menu, select the DEFAULT menu option.
2. Press the POWER/ENTER button to display the Set Default All
screen.
3. Press the AIR/▲ button to reset all parameters to their default
settings. The messages SAVING DATA and END display, then the
main menu displays.
To reset all default alarm point settings:
1. From the main menu, select the DEFAULT menu option. The Set
Default All screen displays.
2. Press the DISP/ADJ button to display the Set Default Alarm
screen.
3. Press the AIR/▲ button to reset all alarm points to their default
settings. The messages SAVING DATA and END display, then the
main menu displays.
To reset the oxygen zero setting:
1. From the main menu, select the DEFAULT menu option. The Set
Default All screen displays.
2. Press the DISP/ADJ button. The Set Default Alarm screen
displays.
3. Press the DISP/ADJ button to display the Set Default Oxygen Zero
screen.
4. Press the AIR/▲ button to reset the oxygen zero setting to its
default value. The messages SAVING DATA and END display, then
the main menu displays.
A
FA
NI
YE
S
D
U
A
:
R
S
I
D
L
T
E
OP
:
LAY
L
SE TL
L
FA
NI
YE
S
D
U
A
:
R
S
I
D
R
T
E
OP
:
LAY
A
SE TL
AM
Y
FA
NI
YE
S
D
U
A
:
R
S
I
D
Z
T
E
OP
:
LAY
R
SE TL
XEO
O