RKI Instruments GX-2012 - Page 95

GX-2012 Operator’s Manual Start Up, Leak Check Mode • 87
NOTE: If both CL RMNDR and BP RMNDR are turned off, a WARM
UP screen will display before the warm up sequence
continues.
8. If ID DISP is turned on, the User ID Screen displays for a few
seconds and then the Station ID Screen displays for a few seconds.
9. The Date/Time Screen appears for a few seconds.
This screen displays the current year, month, date, and time.
10.The Battery Level and Alarm Pattern Screen appears next.
AL -- H indicates latching (hold) alarms and AL -- A indicates self-
U Id
- - - - - - - -
S Id
- - - - - - - -
2011
8
31
22:39
DATE
bAtt
3.7
AL-H V