EasyManua.ls Logo

RKS MC3 - E-Bike Operation; Pre-Ride Checks; Battery Power Management

RKS MC3
35 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
20
Never jump, race, perform stunts or abuse your bicycle.
Never ride under the influence of intoxicating drugs or alcohol.
We strongly recommend switching-on the lighting system, when
riding in the dark, fog or poor visibility.
When cleaning this bike, please wipe surface with a piece of soft cloth.
For the very dirty spot, you can wipe it with a little neutral cleaning
agent.
Warning: Do not wash this electric bike direct with spraying water, to
avoid water entering electric components, which may result in damage of
the electric components and then, the electric assistance bicycle can not
be normally used.
2. Operation
Your new electric bicycle is a revolutionary transporting means, applied
with alloy aluminum frame, Lithium battery, a super high efficient electric
hub motor and controller with pedal assistance system, to make easy
biking. The above mentioned equipment will ensure high safe riding with
excellent performance. It is important for you to learn the following
guideline in order to get the best possible experience with your electric
bicycle.
2.1. Checking Before Riding
2.1.1. Please ensure tires are fully inflated to 45psi, before riding.
Remember, performance of the bike is directly related to the weight of the
rider and baggage/load, together with the stored energy in the battery;
2.1.2. Charge overnight, prior to riding the next day;
2.1.3. Apply chain oil periodically and clean if dirty or gummed up, using a
degreaser, then wipe clean and oil bicycle chain again.
2.2 Switching on the battery
In this manual, we shall instruct you how to use
the following battery-pack:
fig.18 Model BT-1301 Battery-pack with Carrier

Related product manuals