18
- The number of the hours that the WASH 250 XT has been powered On since the
counter was last reset.Press [Enter] or [Mode] to return to the menu.In order to reset
this counter to 0, you have to hold the [Up] and [Down]-button and press the [Enter]-
button.
Lamp On time
- This option enables you to read the total number of the operation hours with the lamp
on since the WASH 250 XT has been fabricated.Press [Enter] or [Mode] to return
to the menu.
- The number of hours that the lamp has been powered On since the counter was last
reset.Press [Enter] or [Mode] to return to the menu. In order to reset this counter to 0,
you have to hold the [Up] and [Down]-button and press the [Enter]-button.
Lamp strikes
- By this option you can read the total number of the lamp strikes since the WASH
250 XThas been fabricated.Press [Enter] or [Mode] to return to the menu.
-The number of the lamp strikes since the counter was last reset.Press [Enter] or
[Mode] to return to the menu. In order to reset the counter to 0, you have to hold the
[Up] and [Down]-button and press the [Enter]-button.
Max. fixture head temperature
- By this option you can read the max. temperature of the head inside since the
WASH 250 XT has been fabricated.Press [Enter] or [Mode] to return to the menu.
- Max. temperature of the head inside since the counter was last reset.Press [Enter] or
[Mode] to return to the menu. In order to reset the counter to 0, you have to hold the
[Up] and [Down]-button and press the [Enter]-button.
Current fixture head temperature
Temperature readouts of the head inside in Celsius. Inside temperatures below95°C are not critical. 95° C and
more lead to the lamp being switched off. Please note that the outside temperature should not exceed 45° C.
DMX values
Readout DMX values of each channel received by the fixture. Use the [Up] and [Down] buttons to select desired
channel and press [Enter] to read its value coming to the fixture or [Mode] to cancel and return to the menu.
To Next Page
Loading...
