26
8.8 Reset function
Press [Enter] button to run a reset. This option enables the WASH 250 XT to index all effects (functions) and
return to their standard positions.
8.9 Special functions
Use the [Up] and [Down] buttons to browse through the special functions and select the one by pressing [Enter].
Manual control of effects
The function allows you to control manually the channel functions of the fixture. Use the [Up] and [Down]
buttons to select desired function and press [Enter] to adjust the effect or [Mode] to cancel and return to the
menu.
Lamp adjustment
This function can be used when you make the fine adjustment of the lamp.If you select "LAAd" pressing by
[Enter]-button ,all effects will be canceled,shutter will be opened and the dimmer intensity will be set onto 100%.By
using the options "PAn, tilt,CYAn,MAGE,YELL,dimr" you can focus the light on a flat surface (wall) and perform
the fine lamp adjustment.
To Next Page
Loading...
