15
3. Press and hold selected preset button until jog-wheels activating buttons stop to ash.
Note: the FollowSpot controller presets are common for all user show and cannot be saved on the USB ash
drive.
If you use the FollowSpot Controller in the RoboSpot, the FollowSpot controller presets will be overwriten by
presets from RoboSpot.
To recall the FollowSpot controller preset
Press a button with stored FollowSpot Controller preset.
To delete the FollowSpot controller preset
1. Press and hold desired preset button until the jog-wheel activating buttons (8/10/16/18) and the pan/tilt
buttons (5/6) start to ash.
2. Press and hold selected preset button until the jog-wheels activating buttons stop to ash. Do not press any
jog-wheels activating button. The preset button will stop to light.
Note: you can write notes on the white elds of the FollowSpot Controller, use a marker on an alcohol base and
a suitable cleaning liquid (on alcohol base) for removing the notes. Never use solvents!
To Next Page
Loading...
