Driving in reverse
1. Start the engine.
2. Put the parking switch in the OFF position.
3. Move backwards by pushing the right foot pedal forwards.
4. Stop the machine by slowly releasing the foot pedal.
7.2.1 Cruise control
Use the cruise control to save a driving speed and keep driving without using the foot pedal. The cruise control has the
following options:
SET +
↑
ON/OFF ← O → CANCEL
↓
RESUME -
ON/OFF
• Activate the cruise control: the driving speed will not be changed or saved.
• De-activate the cruise control: the saved driving speed will be deleted.
NOTICE The cruise control will be de-activated when:
• The right foot pedal (backwards) is pressed.
• The brake is used.
• The seat is unoccupied.
CANCEL
• De-active the saved driving speed, the saved driving speed will not be deleted.
SET +
• Save the current driving speed.
• Increase the saved driving speed.
RESUME -
• Resume the saved driving speed.
• Decrease the saved driving speed.
NOTICE When using the foot pedal to increase the driving speed, the machine will drive faster. When releasing
the foot pedal, the machine will return to its saved driving speed.
7.3 Operating the mowing units
7.3.1 Before you start mowing
Inspect the terrain:
• Remove objects that could be thrown away by the machine from the area to be mowed.
• Keep people and animals out of the area to be mowed.
• Make sure there are no low-hanging branches or similar obstacles that can impair the driver within the area to be
mowed. Remove these obstacles.
• Inspect the area to be mowed. Follow a safe mowing pattern. Do not mow in areas where the traction or stability is
not sufficient.
Operating 41
To Next Page
Loading...
