8 Maintenance
Professional, regular maintenance of your mower is important. A well maintained mower will enable you to work safer
and better. Moreover, good maintenance results in longer service life, reduces the extent of any damage and eliminates
costly, time-consuming repairs. This chapter provides information about the maintenance you must perform daily and at
other regular intervals. These are simple maintenance tasks, yet they are nevertheless important. It is therefore strongly
recommended that the maintenance recommendations be strictly adhered to and carried out for you. Roberine has an
excellent dealer network with trained service engineers who perform maintenance and repairs for you.
8.1 The bonnet
To open the bonnet:
1. If the mower is equipped with the optional cargo carrier: pull out the locking pins at the rear and lower the cargo
carrier.
2. Rotate the lock clockwise to unlock the bonnet.
3. Lift the bonnet.
CAUTION! Make sure the cargo carrier is empty before removing it. The maximum capacity of the cargo carrier
is 15 kg.
To close the bonnet:
1. Carefully lower the bonnet.
2. Rotate the lock anti-clockwise to lock the bonnet.
3. If applicable, put the cargo carrier back into position and secure the locking pins.
8.2 Maintenance intervals
Use the following maintenance interval tables for routine maintenance of your machine.
NOTICE Under extreme circumstances, additional maintenance services may be required:
• Extreme heat, excessive dust or other extreme conditions may cause engine parts to become dirty or
blocked.
• The quality of the engine oil may be reduced if the machine is constantly driven too slow or at a low engine
speed, or if it is intensively used for short periods of time.
Maintenance 46
To Next Page
Loading...
