9.3 Preparing the fuel and engine for storage
Fuel:
1. Fill up the tank completely with fuel.
NOTICE Filling the fuel tank reduces the volume of air in the tank, which slows down the deterioration of the
fuel quality.
2. Park the machine in a safe, well-ventilated location.
Engine:
The storage procedure for the engine must be observed if the machine is not going to be used for more than 60 days.
1. Change the engine oil and replace the oil filter while the engine is still hot.
2. If necessary, service the air filter.
3. Remove dirt from the engine air intake grill.
4. Clean the engine and the engine compartment.
5. Remove the battery (see Replacing the battery on page 64).
6. Clean the battery terminals (see Cleaning the battery terminals on page 64). Check the electrolyte level if the battery
is not maintenance-free.
7. Store the battery in a cool, dry, frost-free location.
NOTICE A stored battery must be recharged every 30 days.
8. Recharge the battery.
9. Store the machine in a dry, protected location. If the machine is stored outdoors, cover it with a watertight cover.
NOTICE For more detailed information about engine storage, see your Yanmar Engine Manual.
Transport and storage 71
To Next Page
Loading...
