8.10 Transmission and hydraulic oil
Change the hydraulic oil every 500 hours or once a year.
NOTICE Only use the recommended oil, seeTechnical specifications on page 33. Do not use engine oil or
“Type F” automatic transmission oil.
Check the hydraulic oil level
Before you begin: Park the machine safely and let the engine cool down.
1. Hydraulic oil filler cap
2. Drain plug
3. Hydraulic oil gauge
1. Check oil at gauge (3):
• The oil level must be between
minimum and maximum markings.
2. Add oil if necessary (1).
8.11 Cleaning the mowing units
Clean the mowing units after every use.
CAUTION!
• Always wear protective gloves when performing a service function on or near a mowing unit. Severe injury
can result from contact with sharp cutting edges.
• When a mowing unit is rotated by hand it is possible that the other mowing units will also rotate.
Before you begin: Park the machine safely, turn off the engine and the mowing units. Make sure the mowing units have
come to a complete stop. Remove the ignition key.
1. Rinse the mowing units with low-pressure water.
2. Lubricate the mowing units. Refer to Lubrication on page 47.
Maintenance 55
To Next Page
Loading...
