12 Warranty conditions
The warranty is granted by Roberine for a period of 24 months or 1500 hours whichever occurs first from the date of
delivery of the machine.
The warranty covers the repair and/or replacement of parts that become defective during the warranty period as a
consequence of a hidden defect of the machine. In the event of repair or replacement, the warranty will not be extended.
Repairs and replacement of defective components that are necessary as a result of normal wear and tear during use of
the machine are not covered by the warranty.
Parts that require replacement at regular service intervals are not covered by the warranty.
Also excluded from warranty coverage are defects resulting from deliberate damage, failure to comply with the
instructions provided in this manual, operating errors or repairs which are not performed by Roberine or on behalf of
Roberine.
Warranty repairs must be carried out by your local authorised Roberine dealer with the use of original Roberine parts.
Costs such as lost income, travel costs, installation costs, shipping costs, etc. are not covered by the warranty and will
not be reimbursed.
Any situations not covered by the preceding provisions shall be subject to the most recently published General Terms
and Conditions of Delivery for the Metal Industry (Metaalunie conditions).
NOTICE Roberine is not liable for any direct or indirect damage as a result of operating errors, lack of expert
maintenance or any use other than described in this manual. The liability of Roberine also lapses in the event
that you or a third party performs work, such as the installation of additional equipment, on the machine or
accessories without the permission of Roberine.
Warranty conditions 76
To Next Page
Loading...
