Roberts Play M2 - Software version

18
Software version
The software version display cannot be altered and is just for your reference.
1. Press the On/Off button to switch on the radio.
2. Press the Menu/Mode button. The main menu will show on the display.
3. Press the Tuning Up or Down buttons until 'SYSTEM' appears on
the display. Press the Select button.
4. Press the Tuning Up or Down buttons until 'SW VER' appears on the
display. Press the Select button to display the software version.
5. Press the Menu/Mode button as needed to exit.
1
3,4
2,5
3,4
3,4