Roberts Play M2 - Selecting a station - DAB; Secondary services - DAB

Selecting a station - DAB
1. Press the On/Off button to switch on your radio.
2. If you are listening in FM mode, give a long press on the Menu/Mode
button until the 'DAB' mode is selected.
3. Press the Tuning Up or Down buttons to step through the list of
available stations.
4. When the desired station name appears on the display press the Select
button to select the station. The radio will tune to the new station. If
the select button is not pressed the radio will automatically tune to the
station after several seconds.
5. Adjust the Volume to the required setting.
Note: If after selecting a station the display shows 'OFF AIR' it may be
necessary to relocate your radio to a position giving better reception.
Secondary services - DAB
1. Certain radio stations have one or more secondary services associated
with them. If a station has a secondary service associated with it the
secondary service will then appear immediately after the primary
service as you press the Tuning Up button.
2. To tune to the secondary service, press the Select button. Most
secondary services do not broadcaset continually and if the selected
service is not available, the radio will re-tune to the associated primary
service.
3
2
3
4
1
7
2