Roberts Play M2 - Using the AC adaptor

5
Using the AC adaptor
 3ODFH\RXUUDGLRRQDÀDWVXUIDFH
2. Plug the mains adaptor into the DC input socket located on the right
hand side of your radio (marked 'DC') ensuring that the plug is pushed
fully into the socket.
3. Plug the mains adaptor into a standard mains socket outlet and switch
on the wall socket. Whenever the adaptor is used the batteries are
automatically disconnected.
The AC adaptor should be disconnected from the mains supply and from
the radio when not in use.
IMPORTANT: The mains adaptor is used as the means of connecting the
product to the mains supply. The mains socket and any multi-way mains
block used for the product must remain accessible during normal use. In
order to disconnect the product from the mains, the mains adaptor should
be removed from the mains socket completely.
Use only the mains adaptor provided with the product, or a genuine
replacement provided by Roberts Radio. The use of alternative adaptors
will invalidate the guarantee.