If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
24
Timer set to Weekdays
1. Rotate the Tuning/Select control until "weekdays" is highlighted
on the display. Press and release the Tuning/Select control.
2. Rotate the Tuning/Select control until the hour digits are
highlighted on the display. Press and release the Tuning/Select
control.
3. Rotate the Tuning/Select control to select the required hour.
Press and release the Tuning/Select control.
4. Rotate the Tuning/Select control until the minute digits are
highlighted on the display. Press and release the Tuning/Select
control.
5. Rotate the Tuning/Select control to select the required minute.
Press and release the Tuning/Select control.
6. Rotate the Tuning/Select control until the duration hour digits are
highlighted on the display. Press and release the Tuning/Select
control.
7. Rotate the Tuning/Select control to select the required hour.
Press and release the Tuning/Select control.
2,3
4,5
1
6,7
continued on next page
To Next Page
Loading...
