Roberts RD70 - Alarm Source and Customization

18
Setting the alarm clock - cont.
8. The alarm can be set to buzzer, DAB radio or FM radio. For whichever
radio mode is selected, the radio alarm may be set to any of the stations
which have been stored as presets or to the station most recently listened
to.
Choose the 'Source' option for the alarm then choose either 'Buzzer' or
the required radio mode.
9. If setting the alarm to a radio option, choose the 'Preset:' option then choose
from either the radio station 'Last Listened' to, or from the presets 1 - 10.
Note: You can only set the alarm to use a preset which has already been
stored.
10. Choose 'Duration' and choose the duration time from 15 to 120 minutes.
11. Choose the 9ROXPH option.The radio uses the saved volume setting for
each alarm when it sounds. Use the Tuning control to set the required
volume.
12. In order to store the alarm settings rotate Tuning until 'Save' is highlighted.
Press Tuning to store the alarm settings. The new alarm setting will show
on the display.
Active alarms are shown using small alarm indicators and the corresponding
alarm number
21
at the bottom of the playing displays and on the clock
display when in Standby.
Note: If you make a mistake at any point while setting the alarms, use the
Menu button to cancel the operation.
Alarm
Frequency
Wake Up time
Source
Duration
Volume
Save
Alarm 1 Info. 16.34
On
Daily
07:30
Buzzer
60
7
>
>
>
>
>
Buzzer
DAB
FM
Source 16.34
Alarm
Frequency
Wake Up time
Source
Preset
Duration
Volume
Alarm 1 Info. 16.34
On
Daily
07:30
DAB
60
7
>
>
>
>
>
Last Liste
>
Last Listened
1. BBC Radio 2
2. BBC Radio 3
3. Absolute
4. Heart
Preset 16.34
15
30
45
60
90
120
Duration 16.34
Volume 16.34
12
Alarm
Frequency
Wake Up time
Source
Duration
Volume
Save
Alarm 1 Info. 16.34
On
Daily
07:30
Buzzer
60
7
>
>
>
>
>