Robin LG072 User Manual

9. CHECKING FUNCTIONAL MEMBERS STATOR ASS'Y
9-1 STATOR ASSEMBLY
9-1-1 MEASURING WINDING RESISTANCE
Check the resistances of the leads from the stator with a
tester. (See Fig.
9 - 1 .)
Check all the leads mrhich are shown by type in the tables
below.
Any lead which is inactive is faulty.
NOTE: Testers are not so accurate that some margin of er-
ror must be taken into account when reading the tester
against the values shown in the Tables
9- I, 9-2, and 9-3.
I WHITE I 0.7 - 6.5!2 I 0.1 - 0.9R ! 2.5 - 5.0R I
Table 9- 1
LG152, LG201, LG301, LGK152
WHITE
0.2 - 3.1R I 1.5 - 4.lQ
BLUE-BLUE 0.1 -0.5R
Table 9-2
Fig. 9- 1
LG201 D, LG301 D
Wire cotor ' RED
BLACK
1 GREEN
I
WHITE I 0.4 - 1.3R
0.4 - 1.3s1 ; 1.7 - 3.6R
A
BLUE-BLUE 0.1 - 0.5R
Table 9-3
9-1 -2 MEASURING INSULATION RESISTANCE ROTOR
Refer to 8-4 MEASURING INSULATION RESISTANCE.
9-2 ROTOR ASSEMBLY
9-2-1 WINDING RESISTANCE MEASURING
SLIP RING
Check the resistance between the two slip rings with a test-
er. (See
Fig. 9-2.)
The resistance is normal if it is anywhere from 6 ohms to 13
ohms.
TESTER
Fig. 9-2
-33-

Robin LG072 Specifications

General

Brand	Robin
Model	LG072
Category	Portable Generator
Language	English