24
Warning!
The flue must not be in contact with or close to
inflammable material and must not pass through
building structures or walls made of inflammable
material.
When replacing an old appliance, the flue system
must be changed.
Important
Ensure that the ue is not blocked.
Ensure that the flue is supported and
assembled in accordance with these
instructions.
Fitting the Coaxial Flue (Ø 60 / 100 Horizontal)
Contents:
1x Silicone O-Ring (60mm)
1x Elbow (90°)
2x Wall Seals (Internal & External)
1x Flue Pipe including Terminal (1 metre - 60/100)
2x Flue Clamps
4x Screws
2x Seals
To Next Page
Loading...
