EasyManua.ls Logo

ROC COMBI HE 2802 - Instruction and Precautions for Power Connection

ROC COMBI HE 2802
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
26
Instruction and precautions for
power connection
The boiler should not have a plug socket
only a ex
Voltage/frequency for the gas boiler:230
V~/50Hz
Please obey the following steps when
operate the gas boiler:
-- Do not touch the appliance with parts of the
body that are wet or damp and/or bare feet.
--Do not pull the power cable.
--Do not expose the appliance to direct sun
and rain.
--Do not allow children or inexperienced
people to operate the appliance.
User should not change the power cables.
If the power cable has been damage, turn off
the appliance. Ask an installer/engineer to
change the power cable.
For electrical safety, please make the
correct earth connection with accordance to
local safety rules.
The above safety requirements must be
checked. If you have any questions, please
ask the installer/engineer to check the
appliance carefully. The manufacturer will not
take any responsibility for any losses caused
by not earthing the appliance.
Ask the installer/engineer to check the
circuit line, make sure the circuit can match
the maximum power capacity of the appliance.
The maximum capacity is indicated in the
technical section.
Please do not use multi plugs, extension
leads or adaptors. Use a two-phase switch
when connecting to the power grid, the
distance between the contact points should
be at least 3mm, which as stipulated in the
current safety rules regulations.

Other manuals for ROC COMBI HE 2802

Related product manuals