EasyManua.ls Logo

Roca DFK-75 AG - Check after Installation

Roca DFK-75 AG
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22
GB
Cooling capacity is not optimum.
Could decrease cooling capacity.
Could damage the unit.
Could cause electric discharges.
Could damage the unit.
Could damage the unit.
Could cause condensation and stalling.
Could cause condensation and stalling.
Could cause insufficient cooling capacity.
The unit could fall, move or generate noise.
Possible malfunction
Is refrigerant charge in compliance with piping distance?
Are air intake and discharge blocked?
Is power supply cable as specified?
Is grounding correct?
Is installation correct and safe?
Is power supply in compliance with the identification plate?
Is drain correct?
Is heat insulation sufficient?
Has a check for leaks been carried out?
Is the unit secured firmly?
Check
Your product is marked with this symbol. This means that at the end of its service life it should not be mixed
with other non-classified household waste. Therefore, disposal should be carried out in compliance with the
corresponding local and national regulations, in a correct and environment-friendly manner.
The dismantling of the air conditioning unit, as well as the processing of refrigerant, oil and other compo-
nents, should be carried out by a qualified technician and in compliance with the applicable legislation.
Contact your local authorities for further information
ATTENTION
Check after installation
Data and dimensions are subject to change without prior notice.

Related product manuals