Rocam Technology NC500 - Time Settings (Android); FTP Settings (Android); Alarm Settings (Android)

4.4 Delete Camera
Click here to enter camera settings
Select camera that you want
to delete.then click Delete button.
4.5 Camera Setting
Click to access camera settings.
Click here to scan the “Wireless
Access Points”around you.
Wireless Acces Point
displayed,select your
target network,input
it's password.
(if PW is required)
Enter Wifi password.then click
Done button.
4.5.1 Wifi Setting
Click to access User settings.
Click to access WIFI settings.
4.5.2 User Setting
You can change all user name
and passwords except for
the administrator.
Click “Done” to store and enable all settings.
Click “Done”to store and enable WIFI settings,
camera will reboot automatically,you can unplug
the LAN cable and use WIFI.
2019