Start-up
Preparing the MagNA Pure System
25
A
A
Waste containers
Drain the waste container. Discard the contents according to local regulations.
Rinse the waste container with a suitable disinfection/decontamination reagent, see chapter "Mainte-
nance and Care" in the "MagNA Pure 96 Operator’s Guide".
Clean the waste container with water and dry it outside, before reinstalling the adapter and the sensor.
Reinstall the adapters and the sensor with the waste tube in reverse order (steps 5 to 1) on the drained
external waste container.
Ensure that the sensor and the outside of the container are dry.
Place the empty container in a safe place.
To Next Page
Loading...