Prologue
Conventions Used in this Guide
7
Abbreviations
The following abbreviations are used in this Customer Training Guide:
Symbols
In this Customer Training Guide symbols are used as visual signals:
Abbreviation Meaning
CUL Canada Underwriters Laboratories
DNA Deoxyribonucleic Acid
IC Internal Control
LED Light Emitting Diode
MGP Magnetic Glass Particles
MSDS Material Safety Data Sheets
PBS Phosphate Buffered Solution
PCR Polymerase Chain Reaction
RNA Ribonucleic Acid
UV Ultraviolet
WEEE Waste Electrical and Electronic Equipment
Symbol Heading Description
WARNING This symbol is used to indicate that non-compliance with in-
structions or procedures could lead to physical injury or even
death or could cause damage to the instrument.
HOT SURFACE This symbol is used to label potentially hot
instrument surfaces.
BIO HAZARD This symbol is used to indicate that certain precautions must be
taken when working with potentially infectious material.
DANGEROUS ELECTRICAL
VOLTAGE
This symbol is used to indicate the danger of personal injury
due to dangerous electrical voltage. Refers to an imminent dan-
ger that may result in death or serious personal injury.
ULTRAVIOLET LIGHT This symbol indicates that the MagNA Pure 96 Instrument con-
tains high-energy ultraviolet lamps which can cause serious
temporary eye and skin irritation. Never expose unprotected
eyes or skin to the UV light.
IMPORTANT NOTE Information critical to the success of the procedure or use of the
product.
INFORMATION NOTE Additional information about the current topic or procedure.
Procedure continued on next page.
End of procedure.
To Next Page
Loading...