29
R9V
5.6
SETTING THE COFFEE VOL-
UME PORTIONS (volumetric
portion control)
A ow meter allows the machine to calculate
the precise coee volume you would like from
the single or double porta lter. (Generally 25
to 30ML from the single porta lter and 50 to
60 ML from the double porta lter). When you
are sure the grind setting is correct you can
set the ow meter.
It is important to understand that
the volumetric portion control
will dier between each pressure
prole. The ow meter will count
total water volume irrespective of
the time it may take.
Example; Pump pressure of 9 bar
over 30 seconds will yield a dierent
total volume than 5 bar over the
same 30 seconds.
g_5.29
Screen 3 – Programme symbol
1. Navigate to Screen 3 and press
sym-
bol.
2. Load a single porta lter and press the
symbol
.
3. The extraction will begin. When you have
25-30ml (1 cup) of espresso in the cup
press
cup symbol to stop the extrac-
tion.
4. Press the
Rocket Symbol to return to
the home screen.
5. Now, every time you press the one cup
symbol on the home screen you will get
the exact amount you selected.
To program the double porta lter do the same
process with the
cup (50-60ml).
g_5.30