30
R9V
5.7
SETTING DRIP TRAY HEIGHT
Loosen the two screws (1 - g._5.31) and
lower or raise the drip tray (2) to the desired
height. Lock the position by tightening the
two screws.
The height can be varied for a maximum of
55mm.
g_5.31
5.8
PRESSURE PROFILES
The R9V pressure prole system allows up
to 5 time interval and pressure adjustments
to be made over the course of the extraction.
It is therefore possible to increase / decrease
the length of time and change the pressure
for each interval. For example:
Screen 2 – Graph symbol
1. Press
symbol.
g_5.32
Prole A settings
2. Press
to select the prole you wish to
edit.
3. Press
to scroll from time to pressure.
4. Press
to increase or to decrease
seconds or pressure.
5. Press
to conrm (save) and to
return to home screen.
PROFILE A
T1 10.0
T2 15.0
T3 5.0
T4 0.0
T5 0.0
P1 4.0
P2 9.0
P3 5.0
P4 0.0
P5 0.0
S
bar
g_5.33
To Next Page
