Rocket GIANNINO - Coffee Hopper Installation; Electrical Power Supply

35
GIANNINO
g_4.3
4.1 Coffee hopper installation
Before installing the co󰀨ee hopper
and relative cover, wash them
with water and mild detergent to
remove any processing residues
Place the hopper (1 - g._4.3), correctly and
stably inside the rubber collar, with the fan inserted (2)
and tighten the safety screw(3 - g._4.3)
MACCHINA
IN
MANUTENZIONE
VIETATO
L’ACCESSO
oltre questo limite
ATTENZIONE
ORGANI
IN MOVIMENTO
ATTENZIONE
CORRENTE
ELETTRICA
MANUTENZIONE ORDINARIA
OLIARE INGRASSARE
TUTTE LE PARTI IN MOVIMENTO
OGNI 30 GG
MACCHINA
IN
MANUTENZIONE
VIETATO
L’ACCESSO
oltre questo limite
ATTENZIONE
ORGANI
IN MOVIMENTO
ATTENZIONE
CORRENTE
ELETTRICA
MANUTENZIONE ORDINARIA
OLIARE INGRASSARE
TUTTE LE PARTI IN MOVIMENTO
OGNI 30 GG
Before connecting the machine
ensure that the identication label
data comply with those of the local
electric mains.
The earthing system must be carried out in
accordance with the provisions of current legislation.
Check that the switch under the frame is off and
therefore in zero position (O - OFF - fig._4.4) before
connecting the device to the electrical mains
4.2 Electrical power supply
g_4.4
EN
?