42
GIANNINO
9 -
DISPOSAL
Remove any residual coee and render the machine
non operational by cutting the power cable. Do not
dispose of the machine in the environment.
Check that machine disposal is
performed with respect of environ-
mental rules and according to the
regulations in force
Information to the users
Under Legislative Decree 25 September 2007, no. 185
and art. 13, Legislative Decree 25 July 2005, no. 151
“Implementation of Directives 2002/95/EC, 2002/96/
EC and 2003/108/EC, regarding the reduction of use
of hazardous substances in electrical and electronic
equipment as well as waste disposal”.
The crossed-out waste bin symbol on the equipment
means that the product, at the end of its service life, must
be disposed of separately from the other types of waste.
The user must therefore transport the equipment, at
the end of its service life, to the appropriate separate
collection centres for electronic/electro-technical waste
products or return it to the dealer when purchasing a
new equivalent equipment.
The appropriate separate collection and the
following sending of the used equipment
to recycling, treatment and eco-friendly
disposal will help avoid negative eects on
the environment as well as on health along
with an easier recycling of the materials
forming the equipment.
MACCHINA
IN
MANUTENZIONE
VIETATO
L’ACCESSO
oltre questo limite
ATTENZIONE
ORGANI
IN MOVIMENTO
ATTENZIONE
CORRENTE
ELETTRICA
MANUTENZIONE ORDINARIA
OLIARE INGRASSARE
TUTTE LE PARTI IN MOVIMENTO
OGNI 30 GG
10 -
MANUFACTURER
Macap s.r.l.
via Toniolo, 18
30030 - Maerne di Martellago (VE) - ITALY
www.macap.it
EN
To Next Page
Loading...
