Rocket GIANNINO - Page 37

37
GIANNINO
■ Remove the protective lm from the display and
activate the device by turning the switch to the I - ON
position (3 - g._5.3). When the device is switched
on, the display will show the symbols representing
the available doses (g._5.3).
A. SINGLE DOSE C. TRIPLE DOSE
B. DOUBLE DOSE D. CONTINUOUS DOSE
g_5.2
Grinding is enabled by selecting one of the four sym-
bols on the display and pressing the grinding start
button once for timed doses (1 - g._5.4). Instead, it
must be kept pressed for the CONTINUOUS DOSE.
Grinding will stop automatically after the set time.
To stop grinding in advance in programmed doses,
press the symbol of the active function or the centre
symbol "R".
At night or when there are no operators in
the room, move the switch to the O - OFF
position (see gure 4.4).
Never operate without the hopper
or without its cover.
MACCHINA
IN
MANUTENZIONE
VIETATO
L’ACCESSO
oltre questo limite
ATTENZIONE
ORGANI
IN MOVIMENTO
ATTENZIONE
CORRENTE
ELETTRICA
MANUTENZIONE ORDINARIA
OLIARE INGRASSARE
TUTTE LE PARTI IN MOVIMENTO
OGNI 30 GG
MACCHINA
IN
MANUTENZIONE
VIETATO
L’ACCESSO
oltre questo limite
ATTENZIONE
ORGANI
IN MOVIMENTO
ATTENZIONE
CORRENTE
ELETTRICA
MANUTENZIONE ORDINARIA
OLIARE INGRASSARE
TUTTE LE PARTI IN MOVIMENTO
OGNI 30 GG
g_5.4
EN
g_5.3
?