RocketFish RF-HTMF19 - Tools, Components, and Hardware; Required Tools

5
RF-HTMF19
Tools needed
You need the following tools to assemble your new TV wall mount:
Edge-to-edge
stud finder
Pencil Level
Socket wrench with 1/2" (13 mm)
socket or adjustable wrench
Tape measure Drill
Tape
Hammer
Wood Stud Wall
Concrete or Concrete Block Wall
3/8" (10 mm)
masonry drill bit
7/32" (5.5 mm)
wood drill bit
Awl
Phillips screwdriver