24
To join an existing Rocketboost network:
1 Set the HUB switch on the sender/receiver to DISABLE.
• The power indicators turn green when the HUB switch is set to ENABLE.
• The power indicators turn blue when the HUB switch is set to DISABLE.
2 Press and hold the POWER button on the your Rocketboost Hub device for
more than three seconds to put it into joining mode. The power
indicator starts blinking rapidly and the unit will stay in joining mode for
30 seconds.
3 Press and hold the button on the sender/receiver for more than three
seconds so the Hub device and sender/receiver enter joining mode.
• The power indicators light steadily if the joining was successful.
• The power indicators blink slowly if the joining was not successful.
4 Press and hold the POWER button on the your Rocketboost Hub device for
more than three seconds to put it into joining mode. The power
indicator starts blinking rapidly and the unit will stay in joining mode for
30 seconds.
5 Press and hold the button on the wireless speaker for more than three
seconds so the Hub device and wireless speaker enter joining mode.
• The power indicators light steadily if the joining was successful.
Outdoor
speaker
RF-RBAUX or other
Rocketboost device.
(HUB: ENABLE)
Sender/receiver
(included with outdoor
speaker) (HUB: DISABLE)
10-1209 RF-RBWSO2_MAN_V3.fm Page 24 Monday, October 25, 2010 2:23 PM
To Next Page
Loading...
Need help?
General
