Ethernet Network Appliance (with Network Address Translation) 17
Publication
9300-IN001A-EN-P - December 2012
3. Configure the module; you can get complete configuration
instructions by clicking the Help tabs to view the embedded manual.
9300-ENA Status Indicators Layout
Reference this chart for status indicator functions when the module is in use.
Indicator Status Description
OK Flashing green/red Booting (or selftest)
OK Flashing green Device operational (heart beat)
OK Steady red Unrecoverable fault
NET Steady green Cable is plugged in and an IP address is configured on
configuration port
LINK Steady green SD card connected (not implemented at this time)
UPL Steady green Uploading new firmware, uploading new configuration
ALM Flashing red Error/alarm code indication
To Next Page
Loading...
