156 Rockwell Automation Publication 1769-IN088A-EN-P - February 2011
Chapter 3 I/O Memory Mapping
System
Interrupt
Low Clamp
Disabled
000000000
Enabled 000000001
Enable
Channel
Disabled 000000000
Enabled 100000000
(1) These functions are not supported by all controllers, such as MicroLogix 1500, using any configuration method.
Refer to your controller manual for details.
Define Indicate this These bit settings
1514131211109876543210
Output
Range
Select
-10 to +10V dc
0 0 0 0 0 0 0 0 0 0000
0 to 5V dc 0 0 0 0 0 0 0 0 0 0001
0 to 10V dc 0 0 0 0 0 0 0 0 0 0010
1 to 5V dc
0 0 0 0 0 0 0 0 0 0011
Output
Data
Select
Raw/Proportional
Counts
0 0 0 0 0 0 0 0 0 0 0 0 0
Engineering Units 0 0 0 0 00010 0 0 0 0
Scaled for PID 0 0 0 0 00100 0 0 0 0
Percent Range 0 0 0 0 00110 0 0 0 0
Define Indicate this These bit settings
1514131211109876543210
To Next Page
Loading...
Need help?
General
