1769-L32E, 1769-L35E CompactLogix Controller 19
Publication
1769-IN020D-EN-P - October 2008
Assign an IP Address
You can set the IP address by using any of these utilities:
• Rockwell BOOTP Utility (available with RSLinx and RSLogix 5000
software)
•RSLinx software
• RSLogix 5000 software
Use BOOTP to Set the IP Address
The BOOTP utility is a standalone program in one of the following
directories:
• RSLinx Tools directory in the Rockwell Software program folder on
the Start menu (the utility is automatically installed when you install
RSLinx software)
• Utils directory on the RSLogix 5000 software installation CD
Follow this procedure to use the BOOTP utility.
1. Start the BOOTP software.
2. Select Tools>Network Settings.
3. Enter the Ethernet mask and gateway.
To Next Page
Loading...
