1769-L32E, 1769-L35E CompactLogix Controller 23
Publication
1769-IN020D-EN-P - October 2008
7. Click the appropriate radio button to choose the Network
Configuration type.
8. Enter the IP address, network (subnet) mask, and gateway address (if
needed).
Use RSLogix 5000 Software to Set the IP Address
You can use RSLogix software to set the IP address.
1. Make sure the controller that uses the IP address is installed and
running.
2. Connect to the controller via the serial connection (see page 15
).
3. Start RSLogix 5000 software.
To Next Page
Loading...
