Before you begin
Please review the following information before starting this lab.
About this lab
Learn the basics of drive programming using the new PowerFlex 525 AC drive. Students will configure and commission the 525
drive utilizing a USB cable “Mains Free” with Connected Components Workbench™ and RS Logix 5000 version 20.01. Finally,
this lab shows how Premier Integration enhances the use of the Network-Enabled PowerFlex 525 drive with Logix controllers.
See how to save time during system development, operation, and maintenance. Also, learn about the new Automatic Device
Configuration (ADC) feature for PowerFlex 750-Series and PowerFlex 525 drives in RS 5000.
Tools & Prerequisites
Software programs required
• RS Logix 5000™ Logix v20.00.03
• PowerFlex525 AOP for RSLogix5000 v17 to v20+ v1.01.249
• Connected Components Workbench™ v4.00.00
• RS Linx Classic™ v2.59.00
Hardware devices required
• 1769-L43 or the 1769-L35e PLC Demos
• PowerFlex 525 v1.003.80
• Ethernet patch cables
• USB A to B Cable
Files required
• L43_PF525_Lab.ACD Depending on which demo you are working with
• L35e_PF525_Lab.ACD Depending on which demo you are working with
Page 3 of 64
To Next Page
Loading...
Need help?
General