ROCWARE RC841U - Web Interface System and Network; Network Settings Configuration

RC841U 4K Video Conference PTZ Camera User Manual
13
6.7 Network Settings
1) Lan Settings
The default the IP address is 192.168.100.88, the
MAC address cannot be modified.
2) Port Settings
A. HTTP Port
The IP address identifies a network device and
multiple network programs can run on the device,
each network program uses the network port for
data transmission. The port setting on this page is
to set up which port the WEB SERVER program
uses to transmit. During port mapping, it needs to
be consistent with the port number (default is 80).
B. RTSP Port
Set up the RTSP port, default is 554.
C. TCP Port
Set up the TCP port, default is 5678.
D. UDP Port
Set up the UDP port, default is 1259.
E. Sony Visca
Sony Visca 52381.
3) RTMP(S) Settings
Set the MRL of RTMP(S) and select "on", "off",
"video" and "audio" functions to enable or
disable video and audio in the two streams.
4) SRT Settings
Turn On/Off SRT and set up the SRT Mode, SRT
Sever, SRT Port, SRT Encryption, SRT Password,
SRT Bandwidth Overhead, SRT Variable Latency
and SRT StreamId.
5) RTSP Settings
Turn On/Off the RTSP Auth.
6) ONVIF Settings
Turn On/Off the ONVIF and ONVIF Auth.
7) Multicast Settings
Turn On/Off Multicast, set up the Multicast
Address (default is 224.1.2.3) and Port (default is
6688; 6688 is the multicast port of the first stream
and 6690 is the multicast port of the second
stream).
IP Configuration Type
Fixed IP Address
IP Address
192.168.100.88
Subnet Mask
255.255.255.0
Gateway
192.168.100.1
DNS Address
8.8.8.8
MAC Address
D4:E0:8E:A9:73:45
Lan Settings
RTSP Port
554
TCP Port
5678
UDP Port
1259
Sony Visca
52381
HTTP Port
80
Port Settings
RTMP(S) Settings
First Stream
On Off Video Audio
On Off Video Audio
MRL
rtmp://192.168.100.138/live/stream0
Second Stream
MRL
rtmp://192.168.100.138/live/stream1
SRT Settings
SRT On Off
SRT Port
4578
SRT Password
1234567890
SRT Encryption
None
RTSP Settings
RTSP Auth
On Off
On Off
On Off
On Off
ONVIF Settings
ONVIF
ONVIF Auth
Multicast Settings
Multicast
Address
224.1.2.3
Port
6688
NTP Settings
Server Address
cn.ntp.org.cn
NTP Time Sync On Off
Time Zone
(GMT+08:00) Beijing, Cho
Time Interval (min)
1440
Main Time Show
On Off
Position
X0 Y0
Sub Time Show On Off
Position
X0 Y0
Submit
SRT Bandwidth Overhead
25
SRT StreamId
#!::u=admin
SRT Variable Latency
500
SRT Server
192.0.2.1
SRT Mode
Listener
Submit Cancel
Cancel