THE MELODY COUPLER
When the MELODY tilt tab is pressed, it will light. Any stop
or
coupler
of
the Swell Division will
sound from the highest key being played on the Great manual. This allows a solo melody and an
accompaniment to be played from the same manual.
In its normal setting, the Melody Coupler affects keys 25 through
61
on the Great manual, but its
range is programmable.
~
HOW
TO
SET
THE
RANGE
OF
THE
MELODY
COUPLER:
1.
Hold SET and press the MELODY tilt tab, which starts flashing.
2. Release the SET piston and
MELODY tilt tab.
3.
While the MELODY tilt tab is flashing, press a key which corresponds to the lowest note the
range is to extend. Any note from key 1 to key
61
may be selected. After the selected key has
been pressed, the
MELODY tilt tab will stop flashing.
4.
To
use the new range, press the MELODY tilt tab.
c :
7
To Next Page
Loading...
