LOCAL
ON/OFF
The
595 is equipped with a
LOCAL
ON/LOCAL
OFF
control.
When
the
organ
is set to
LOCAL
ON,
it
operates normally.
When
the organ is set
to
LOCAL
OFF,
none
of
the organ stops
sound
when
keys
or
pedals are
pressed.
MIDI
information is, however, generated
on
activated
MIDI
Master
Channels
and
MIDI
coupler channels.
In
addition,
movement
of
the
Expression
Pedal
generates
MIDI
volume
information
on
activated
MIDI
Master
Channels
and
MIDI
Coupler
Channels
but
does
not
affect the
organ
stop volume.
An
application for this
is
when sequencing, the
volume
of
the
organ
may
be
sequenced
one
way, and the
volume
of
the
MIDI
voices another way.
MIDI
information received
on
the
MIDI
Master
Channels will still control
the
595
when
the
organ is
set
to
LOCAL
OFF.
To
set the organ to
LOCAL
OFF:
1.
Hold
SET,
and
press
any
MIDI
coupler.
It
will flash.
2.
Hold
SET,
and
press
and
release
General
Cancel.
The
General
Cancel
light
will
go
off,
signifying
LOCAL
OFF
is activated.
To
set
the
organ to
LOCAL
ON:
1.
Hold
SET,
and
press
any
MIDI
coupler.
It
will flash.
2.
Hold
SET,
and
press
and
release General Cancel.
The
General
Cancel
light will
go
on,
signifying
LOCAL
ON
is
activated.
The
Local
On/Off
status
can
be
saved
in
the combination action
of
the
organ
.
RETURNING
TO
DEFAULT
SETTINGS
To
return to the default settings
for
Send
Channel, Detected/Fixed Velocity,
Octave
Transpose,
MIDI
Master
Send
Channel, Primary Receive Channel
and
Local
On/Off:
1.
Hold
SET
and
press General Cancel (0).
The
SET
light will
go
off
and
the
MIDI
parameters will
be
set to factory default.
2. Continue to hold
SET
and
General Cancel
for
about 5 seconds until
the
SET
light
comes
back
on.
The
General
and
Divisional pistons for the selected
memory
will
be
restored
to factory default.
Repeat
this procedure for
each
memory
bank
you
wish to restore.
3. Continue to hold
SET
and
General Cancel
for
about 5 seconds
more
until
memory
1 piston
lights.
The
Melody
and
Bass
couplers will
be
restored to their factory
default
settings.
In
addition, an All Notes
Off
message
is
generated to
clear
any
problems
with
other
MIDI
equipment,
so
this can be used as a
"Panic
Button"
should
any
other
MIDI
devices
get
confused.
If
the
SET
and
General Cancel buttons are held
in
until
the
SET
button lights again, then
the
combination action for the current
memory
level will
be
reloaded with factory defaults selections.
16
To Next Page
Loading...
