Sample Application
R&S
®
ETL
47Getting Started 2118.4130.02 ─ 04
4. Press the "Digital TV" softkey.
5. Press the [MEAS] key.
6. Select the "Digital TV Settings" softkey.
7. Compare the modulation parameters.
8. Select the correct modulation standard.
9. Press the "Spectrum" softkey.
10. To adjust the input attenuator, press the "Adjust Attenuation" softkey.
The spectrum of the input signal is displayed.
Figure 8-1: Digital TV Spectrum measurement
Performing the Measurement
To Next Page
Loading...
