Rohde & Schwarz NGMO1 - Page 54

Power Supply NGMO IEEE Commands
5-2 4.00 / 07-2004
Com-
mand
Parameter Par. value Description Def. SCPI
MIN 0
MAX 9
*RST Returns the power
supply to the
*RST default
conditions
*SAV <CHAR_VAL> or
<NUM_VAL>
Saves the present
setup as the user-
saved setup (1..9)
1 First user setting
9 Ninth user setting
MIN First user setting
MAX Ninth user setting
*SAV? <CHAR_VAL> Queries the
possible min and
max value
MIN 1
MAX 9
*SRE <NUM_VAL> See status
model
structure for
further
information
Programs the
service request
enable register
*SRE? <NUM_VAL> See status
model
structure for
further
information
Queries the
serviee request
enable register
*STB? See status
model
structure for
further
information
Reads the status
byte register
*ARM Sends a
“SENSE:PULSE:S
TART ON"
command to both
channels
*AARM Sends a
“SENSE:PULSE:S
TART ON"
command to
channel A
*BARM Sends a
“SENSE:PULSE:S
TART ON"
command to
channel B
*TRG Sends a
“SENSE:PULSE:S
TART ON" and a
soft trigger
command to both
channels
*ATRg Sends a
“SENSE:PULSE:S
TART ON" and a
soft trigger
command to
channel A